Did you know there’s a perfect way to remove the jeans button without breaking it? If you’ve ever had to take out your jeans buttons when they’re too tight, then you’ll know how frustrating this is.
The problem with the standard method of removing jeans buttons is that you can often end up breaking them or making holes in your clothes.
And there’s another problem. Once you’ve removed the button, you still have to find the hole to put it back in. That can take ages and is also a pain in the neck.
But now, I’ve come up with a method that works like magic.
How to Remove Jeans Button With Two Pliers?
Here’s a simple solution to the problem of removing jeans buttons.
- All you need is a pair of pliers, some patience, and a bit of practice.
- The trick is to place the pliers around the button, then gently pull it out.
- While the button is still stuck, you can use the pliers to push it out of the fabric.
- The final step is to gently squeeze the button to remove it from the jeans.
Tools to Use:
In the end, you’ll need the following items:
- The Pliers
- The Screwdriver
- Wire Cutters
- Face protection tools
Step 1: Choose Your Jeans
In order to remove the button, choose the jeans that are required for removing the button. Make sure your jeans are the right size. It’s better to take them in than to take them out. As soon as you place your jeans on a flat surface, you should not hurry with the next step. Last, if the rivet is not broken, make sure the holes don’t get torn.
Step 2: Twist The Button
Your hands are now ready to grip the sides with the help of the pliers. It’s time to twist the button. Screw the button into place if you see the button gets screwed in. After twisting the button, it’s time to proceed with the next method if it doesn’t work.
As soon as you have succeeded with the first attempt, you can go ahead and replace that button with a new one. If this happens to you, there are a variety of replacements that you can try out. It is possible to remove the button without a lot of hassle.
Step 3: Use Two Pliers
In this step, you’d need two pliers to grip the sides firmly. Then use a second plier to grip the back side of the button. It’s important to have both the right and the wrong tools for different jobs. You’ll have to be very careful how you use the pliers. Has your face protection been worn? Grip the edges with force and ensure that you put pressure on the corners as well.
How to Remove Jeans Button with Pliers & Screwdriver?
It’s an old trick, but it works like a charm. Here’s how it works:
- Find a screwdriver or pliers
- Turn the button until it’s loose
- Place it between the jaws of the pliers or screwdriver and twist
- Repeat step 2 to loosen the button again
- Remove the button from the jeans
- Repeat steps 1-5 with the remaining buttons
- Put the jeans back on
It’s that simple.
How to Remove Jeans Button with a Cutter?
The most common and painful method of removing jeans buttons is to rip them off with pliers. This isn’t a very good solution because the button is generally made of leather, and you could easily damage the material if you’re not careful. Even worse, you could accidentally rip the button, so you’ll have to replace it.
Another method is to cut the button off. It’s a good option because you don’t have to use any tools. You just need to use your hands.
However, this is a little bit tricky.
- If you cut the button too close to the seam, you might break the button.
- If you cut it too far, you might rip the fabric.
- You’ll also have to sew the hole back together.
- If you’re not careful, you can ruin the fabric.
Understanding Two-Part Stud Button
It’s easy to spot stud buttons on jeans pieces of outfits, including jackets and pants. When you’re working with stud buttons, it’s really important to understand their anatomy so that you can learn how to handle them properly.
The fasteners go into the material securely, instead of thin layers of thread that connect the fabric’s buttons. Rivets are used instead. These rivets are strong and secure to the fabric. And these buttons should be removed from the jeans whenever possible.
But if you want the task to get completed without any tear or snag in the material, it’s imperative to avoid ripping and snagging the material’s fibres. Stud buttons are a combination of a button on the front and a stud on the back.
The components of a denim jacket are sewn together at the factory before being sent to the retailer. Once you install these jeans, you can punch them together. They are permanent because they are designed to last for several years. It’s the predominant reason why they are so hard to remove.
The fastener can leave a big hole in your jeans’ fabric when the button gets removed from it. You can easily remove the button on threads, but this only leaves just a small trace.
People prefer to use a more reliable method than a hole-filling gel because they want a permanent solution that will not allow their clothes to come apart at the seams. To solve such issues, you can follow the below-suggested procedures.
How To Replace A Button On Your Jeans?
The button replacement process is quite simple. All you need is a pair of scissors and some thread. So, let’s get started with our step-by-step guide:
Step # 1: Remove The Stitched Button Using A Pair Of Scissors
Now, if you have already worn your jeans, then you can start by removing the button from its hole. Here, we need a pair of sharp scissors. Open up your jeans’ back pocket and locate the button you wish to change. Then cut through the stitching between the button and the pocket using your scissors.
Step # 2: Cut The Thread Around The Button Hole
The next thing you need to do is to cut through the stitching that holds the button in place. Use your scissors to cut around the buttonhole. You may need to take out the button to do this, but it will be easier for you to cut the thread if you don’t remove the button yet.
Step # 3: Attach The New Button To Sewing Machine
After cutting through the thread, all you need to do is to attach the button to your jeans using a sewing machine or another machine. Make sure you use the right size thread to sew the new button on the existing hole.
Step # 4: Pull Out The Thread
Once you have successfully pulled out the thread, you will see a hole in the pocket. Now, you need to thread your needle and use it to stitch back on the buttonhole. Make sure you thread the needle from the inside of the pocket. You should be able to easily thread the needle through the button’s buttonhole. Once you are done stitching, you should now be able to put your new button in place.
Step # 5: Insert The New Button And Adjust The Sewing Line
This step is quite easy. Simply slide the new button through the buttonhole, and you should now have a new button that looks much better than the old one.
How to Replace A Button Of Your Jeans With A Regular Button With Holes?
To replace a button in your jeans with a regular button with holes, you first need to undo all of the buttonholes that you already have. Then you will need to sew the buttonhole that you want to use on the button you want to replace. After you have done this, you will need to turn the button over and press it to seal the hole. Next, you will need to take the needle and pull out the thread from the buttonhole. Then, you will need to do the same thing for the buttonhole that you want to use. This is how you can replace a button on your jeans with a regular button with holes.
Why Do Jeans Have Rivets?
If you are wondering why your jeans have rivets, the answer is simple. It is because they want them to last longer. The rivets keep the buttons on your jeans from coming off. They are also useful if you want to add some extra style to your jeans. To make it easy for you to find the rivet on your jeans, you should look for the round, metal piece that is attached to the bottom of your jeans. There will be a lot of little pieces on your jeans, but there will only be one that is shaped like a circle. Once you have found this, just remember where it is. Now, all that you have to do is cut the rivet off of your jeans.
Conclusion
The best way to remove the jeans button without breaking it is to use a pair of scissors. It’s a simple process and is very effective. In addition to that, you can also use a pair of tweezers or a needle. But, if you want to remove the jeans button without any risk, then you should use the method we discussed in this article.